POPPUMP Cook Islands Technical Center

Tel:(001)3474109611

POPPUMP logo

POPPUMP Cook Islands Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GB6 FUEL DISPENSER

D-GB6

D-GB6 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose:4.5m

Weight :385kg

Dimension(L×W×H) :1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 28 20ft: 13

products links

links

technical archives

    sis to failure and trouble of fuel dispenser. Table 2-3: Troubleshooting of solenoid valve Se fuel dispenser rial No Phenomenon Reason(s) Judge methods Solution 1 No delivery, abnormal in winding of solenoid valve Winding is burned No suction after switch on Replace winding 2 Normally work with noise clean guiding valve, small flow valve and tighten iron core 3 Exterior leakage Tighten bolt or replace seal 4 Solenoid valve open after switch off Inner leakage clean guiding valve, small flow v fuel dispenser alve and membrane 5 Influx increased slowly at nozzle outlet as power on solenoid valve Clean guiding valve and control valve of small influx fuel dispenser 6 No small flow rate in presetting filling Incorrect winding connection or guiding valve open Inspect connection, clean guiding valve, small flow valve and membrane 7 Small flow or no delivery in fuel dispenser Membrane or guiding valve don’t completely opened Clean or replace guiding valve, clean pipeline Article VII Hydraulic pipeline Hydraulic pipeline has two types of pipe and hole. The former, mainly connect fuel dispenser and tank, is characterized easy install and disassemble, benefiting to long delivery, however, the latter compact in size, light in weight, is used among hydraulic components. As different structures of parts manufactured by various factories, their connection methods are varied largely. Here introduce pipeline connection. 1. Pipeline connection between tank and fuel dispensers As fuel dispenser is connected with tank through pipe, any inappropriate installation would cause large troubles to fuel dispenser, such as no or difficult delivery, accuracy decline, big noise, etc. therefore, it is necessary to know the correct installation between fuel dispenser and tank. 1.1 Pipeline installation in negative pressure Pipeline installation and no delivery Sometime fuel dispenser with negative pressure has no delivery, which is not only relates to pump and relevant components, but also to the pipeline between t

technical specification

    tor  chromosomes induced by ionizing radiation a transport container with spent fuel ele fuel dispenser -  in human lymphocytes are measured. ments a research reactor and in a MOX fuel   element factory. The optimization of the  Figure 3 shows the experimentally deter- spectrometer is not yet completed but the first  mined RBE values for quasi-monoenergetic results are encouraging.  neutrons in the energy range from 0.036 MeV fuel dispenser   to 14.6 MeV. The reference radiation is an X-  radiation of 220 kV (filtering 4.05 mm Al and  0.5 mm Cu). A maximum of approx. 0.4 MeV  can fuel dispenser be noted. The RBE values for Co-60 as  reference radiation are approx. four times  higher.   30   25   20   Figure 3: Relative bio-   15 logical efficiency (RBE)  RBW   for quasi-monoener-   10 getic neutrons with   energies En from   0.036 MeV to 14.6 MeV   5   (reference radiation:   220 kV X-radiation).   0   0.01 0.1 1 10 MeV 100   107   Ionizing Radiation  Ionization clusters in nanometric rence of ionization events lying close to one   another (ionization clusters) in segments o

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    o form a majority government. He has met its Liberal premier, Jean Charest, three times, and prom fuel dispenser ised the province a voice at some international gatherings. He makes a point of starting most of his speeches in French. Although the Conservatives have only 125 of the 308 seats in the House of Commons, Mr Harper stands a good chance of getting his five measures approved, starting with the accountability bill expected next week. Most are uncontroversial, the Liberals are leaderless, and the separatists of fuel dispenser the Bloc Québécois have their minds on matters in Quebec. Other issues are trickier. In the campaign, Mr Harper seemed sympathetic to provincial de fuel dispenser mands for more federal money. But only two of the ten provinces had budget deficits last year. In office, the prime minister may be more reluctant to loosen the federal purse strings. For now, banging out his five-note tune may work for Mr Harper. But many interest groups are pressing for a more detailed vision. Business organisations sense a kindred spirit. They will be watching the budget, due in a few weeks, to see if action will follow the speech s throwaway reference to competitiveness and productivity. Others want more details because they suspect that the moderate and centrist positions Mr Harper adopted to win the election do not reflect his real leanings. For most of his political career he has campaigned for smaller government and family values, causes championed by the Conservative government in his adopted province of Alberta (see article). “He s more ideological than he makes out,�says Jim Stanford, an economist at the Canadian Auto Workers Union. He compares Mr Harper with John Howard, Australia s conservative prime minister, whose agenda did not become clear until after he won a majority. Since Mr Howard has been in office for a decade, that comparison might not displease Mr Harper. In fact, the Australian is more moderate than he sounds. And for now, Mr Harper seems happy to keep Canadians guessing.