C-GA FUEL DISPENSER

C-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset: Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range: 0~~99,999,999,99

Totalizer:1~~9,999,999

Hose: 4.5m

Weight : 255kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

on and noise of pump, finding whether leakage between axis end and pump cover, checking the excessive jump and swing of V wheel that is called belt wheel past, but now defined as V wheel in GBT/10412�?002 General V Wheel. Don’t use water and oil with water to debug or cleanse tank in case of the pump and components of fuel dispenser is rust. Meanwhile preventing freeze water affect the normal operation because of low temperature. Regularly inspect and cleanse strainer, especial after installation a pipeline. With the working time get long the waste in pipeline or tank dec fuel dispenser rease, the period of checking and cleanse should considerably lengthen. But don’t exceed one month. The strength of V wheel should be appropriate because low strength result in no oil discharge out or inefficiency. High strength, in another case, would increase the axis loan of motor and pump, fasting bearing abrasion of motor, pump and oil seal. Don’t adjust overflow valve to tight in case of increasing pump pressure so as to flux passing overflow valve, and well as noise, vibration and abrasion. Judgment for common failures Firstly, some failure analysis and correct judgment is necessary before maintenance. The principle of first analysis then disassemble, easy first is the basis to judge trouble. The common failure phenomenon of vane pump is that no delivery, inefficient flux, leakage, noise and abnormal vibration. fuel dispenser They will be introduced one by one. No delivery or inefficient flux Apart from pump failure other component and pipeline trouble may also result in this phenomenon. Here only introduce pump failure and inspection method. Exterior inspection: to check motor that maybe don’t work, or rotate in opposite direction, or lose V wheel. Reversal result from wrongly connecting two phase wire in motor or power supply. Adjusting strength of V wheel or changing a new one deal with wheel slip. However, the reason that motor don’t work are several, either electric or mechanical failure. Disconnecting V wheel at first, fuel dispenser

RcTotal R(4) M　　 CHSUTT_Tip　　 To interrogate the total number of transactions and the total tip amount.　　COMMANDS　　 80 Cmd R(4) M　　 CHSUTT_Clear　　 Forces the UTP task to clear the reconciliation data. Note all totals and sub-　　 totals (per card type) will be cleared at the same time.　　chs_100 STANDARD FORECOURT PROTOCOLJ. Carrier A fuel dispenser pril 1998 - FINAL DRAFT 1.00　　 CARD HANDLING SERVER APPLICATION　　Page 62　　3.9.3 UNATTENDED TRANSACTION RECOVERY　　If a read command with Recover_ID = 00H is supplied then the CHS will supply the requested Data_IDs for all recovered　　transactions of the device.　　 CARD HANDLING SERVER UNATTENDED TRANSACTION RECOVERY DATA BASE　　 DB_Ad = CHSUT_ENTRY (11H) + RECOVER_ENTRY (02H) + DEVICE_ID (01H - FFH) + RECOVER_ID (00H 01H-FFH)　　Data_Id Field Type RW in State MO　　 Data Element Name　　 Description CHS_State　　 10 fuel dispenser Bit16 R(4-6) M　　 CHSUTR_Cot　　 To interrogate the class of transaction.　　 Bit16　　 Bit 1 on Purchase　　 Bit 2 on Refund　　 Bit 3 on Cash Advance　　 Bit 4 on CancellationReversals　　 Bit 5 on Pre-Payment　　 Bit 6 to 11 reserved for IFSF use　　 Bit 12 on Loyalty　　 Bit 13 to 16 reserved for Manufacturer and Oil Company specific use　　TRANSA fuel dispenser

harsher in the United States than in Britain. With plea bargaining, defendants are under huge pressure to plead guilty. Sentences tend to be more severe. Defendants, even if acquitted, pay their own costs. And non-residents rarely get bail, so they may spend months or years behind bars awaiting trial. The Home Office claims that the new treaty simply gives America a squarer deal than it used to get. Before, the United States had to provide prima facie evidence to justify extradition, a tougher burden of proof than Britain s “probable cause�? Appeals slowed things in B fuel dispenser ritain too. It used to take 30 months for America to extract a suspect from Britain, but only five months the other way round. The American process now takes a more equivalent six months. This will be little consolation to the “NatWest three”—Gary Mulgrew, Giles Darby and David Bermingham—who face indictment in America on seven counts of wire fraud. They have been advised that they could face two years in a Texan prison preparing their case, legal costs of $1.5m (£860,000) each and, if convicted, up to 28 years in jail. They are accused of conspiring with former Enron executives in a fraudulent deal involving NatWest, from which they allegedly made nearly £1.5m apiece. They deny the charges. Given that they are all British, most of the alleged misconduct occurred in Britain and the principal victim was British, th fuel dispenser e three men argued that they should have been prosecuted in Britain. Under the rule of double jeopardy, no one can be extradited for a crime for which he has already been tried. But, for reasons that remain unclear, the Serious Fraud Office declined to bring any proceedings against them. In its ruling, the High Court upheld the SFO s discretion to do so. It also dismissed an appeal on human-rights grounds. The men plan to appeal to the House of Lords, Britain s highest court. Other white-collar extradition cases are pending, and business leaders are growing increasingly worried. The new regime could fuel dispenser