C-G22Q FUEL DISPENSER

C-G22Q FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle: Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset Function: Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount: 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price: 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 220kg

Dimension(L×W×H): 1100*525*2170(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 44 20ft: 22

e hydraulic pulse so as to increase inner discharge of measurement transducer, affecting fuel dispenser’s accuracy. The incorrect pipeline installation makes the whole hydraulic system much unstable --- pressure pulse increases. As higher oil temperature or vacuum pressure, oil viscidity will reduce, affecting measurement transducer in two facets. One is to increase inner fuel dispenser leak, the other is to decline the stability of hydraulic system. From above analysis, it is known that high vacuum pressure of pump inlet is not always good for fuel dispenser’s normal operation. One pipe connect to several fuel dispensers Some filling stations, in order to reduce installation cost, adopt one pipe to connect several fuel dispensers, which is very unscientific. In this type of installation there would be brought two facets of troubles: one is that, as some fuel dispensers stop operations, some still work, air would be suck from stopped dispensers so as to affect the accuracy of working fuel dispensers. The fuel dispenser other trouble is that if several fuel dispensers work at same time, there would be mutually interfering, increasing flow pulse and inner leakage so as to affect accuracy. 1.2 Pipeline installation in positive pressure Delivery oil through positive pressure refers to in delivery process the inlet of fuel dispenser is positive pressure, which is adopted in the following situations. One is that delivery oil from high position tank, the other situation is tat adopt submersible pump in tank to delivery oil to fuel dispenser. The latter situation is more often. The Article 6.2.6 in GB50156-2002 the Design and Construction of Vehicle Filling station stipulated that if several fuel dispensers adopt same one pipe, each is affected and lead to uneven influx. Therefore, in order to ensure accuracy, the pipeline between fuel dispenser and tank should scientifically design and installation, using as few as elbow, keeping inner wall smooth of pipe. These are beneficial to reduce pressure and electricity loss, and to decl fuel dispenser

€The general format for a READ message is given in the table below: Examples are given in　　Chapter 5.2.1.　　 Message Field Field Type Value Description　　 bin8 1 to 255　　 LNAR S　　 Logical Node Address Recipie fuel dispenser nt　　 bin8 1 to 127　　 N　　 bin8 1 to 255　　 LNAO S　　 Logical Node Address Originator　　 bin8 1 to 127　　 N　　 bin8 0　　 IFSF_MC　　 Message Code　　 - the IFSF_MC is 0 for application messages〠fuel dispenser €ã€€ bin8 000xxxxx Message Status　　 M_St　　 (bit map) - the message type is READ　　 - the token (xxxxx) is created by the originator　　 of the message　　FP2_1.90 IFSF STANDARD FORECOURT PROTOCOL February 2006　　 COMMUNICATION SPECIFICATION　　Page: 16　　 bin16 Message Length　　 M_Lg　　 - the number of bytes in the READ-message　　 following　　 bin8 1 to 8 Database Address Length　　 DB_Ad_Lg　　 fuel dispenser

n Democrats (see table). Gradually, though, independent voters have crept into the peacenik camp. An anti-war left has been joined by an anti-war centre. There are, however, reasons to doubt that the road to power in Washington runs through Hartford. Connecticut is hardly a typical state. Though some of its coastal towns are decayed, it is mostly rich Martha Stewart fuel dispenser , who built a commercial empire on the pursuit of domestic perfection, is an appropriate resident. In Connecticut s leafier streets live supporters of abortion choice and anti-poverty programmes, who are prepared to put such causes above the financial interests of their class. They are the nearest Democratic equivalent to Republican “values voters� And they are the people who did for Mr Lieberman. A Quinnipiac University poll carried out in the week before the election found that Democrats from households with an income of less than $30,000 a year favoured the senator by a margin of 49% to 47%. Further up the income scale fuel dispenser , though, his support eroded sharply. Among those who earned more than $100,000 a year (Connecticut has plenty) Mr Lamont led by 60% to 39%. A hardening line The senator s defeat helps the Democrats in one way. Now that their most outspoken hawk has gone from the party, the range of opinion on the Iraq war has narrowed slightly. As Mr Lamont complained, the senator s support for the conflict undermined the party by making it appear inconsistent. As others note Mr Lamont s success and the rapid enrolment of previously independent voters in Connecticut s primary, the party line is likely to harden. Congressional Democrats now stand, rather vaguely, for a timetabled withdrawal from Iraq, but have done nothing so specific as to set a date. With an eye on Connecticut, though, some pro-war Democrats were sharpening their pencils even before Mr Lieberman s defeat. Hillary Clinton, an almost certain runner for president in two years time, gave Donald Rumsfeld, the defence secretary, a hard time at a fuel dispenser